Oki C 5300n - Manual (Page 116)

C5300 Menu Functions • 116
ZERO
CHARACTER
NORMAL
SLASHED Sets the zero to be slashed
or unslashed.
LINE PITCH 6 LPI
8 LPI Specifies the line spacing
(lines per inch).
WHITE PAGE
SKIP
OFF
ON Change this setting to ON if
you do not wish to print blank
pages
Not available for duplex
printing.
CR FUNCTION CR
CR+LF Sets functionality on receipt
of CR code.
LINE LENGTH 80 COLUMN
136 COLUMN Specifies the number of
columns that will print on a
page (characters per line).
FORM LENGTH 11 inch;
11.7 inch
12 inch
Specifies the length of print
media.
TOF POSITION 0.0 to 1.0 inch in 0.01-inch
increments
Specifies the distance of
print from the top edge of the
paper.
LEFT MARGIN 0.0 to 1.0 inch in 0.01-inch
increments
Specifies the distance of
print from the left hand edge
of the paper.
FIT TO LETTER DISABLE
ENABLE
Sets the printing mode that
can fit print data, equivalent
to 11 inches (66 lines), in the
LETTER-size printable area.
TEXT HEIGHT SAME
DIFF Sets the height of a
character. Change to DIFF if
you wish the character
height to vary with the
Character Pitch setting.
FX Emulation Menu (cont.)
Note: Factory default settings are shown in bold.
Item Settings Explanation