Oki C 5300n - Manual (Page 103)

C5300 Menu Functions • 103
NOTE
The printer automatically adjusts color balance and density
at appropriate intervals, optimizing the printed output for
bright white paper viewed in natural daylight conditions. The
items on this menu provide a means of changing the default
settings for special or particularly difficult print jobs.
Settings revert to their default values when the next print job
is complete.
Color Menu
Note: Factory default settings are shown in bold.
Item Settings Explanation
DENSITY
CONTROL
AUTO
MANUAL
AUTO = image density is automatically
adjusted:
• at power on
• when a new image drum or toner
cartridge is installed
• at intervals of 100, 300 and 500 drum
counts
Auto adjustment takes up to 55
seconds.
Switch to manual only if you wish to
initiate Density Control manually using
the printer menu.
AUTO DENSITY EXECUTE Selecting this will perform the auto
density set up.
COLOR TUNING PRINT
PATTERN
Prints the pattern for the user to
manually adjust TRC. Ordinarily this
function is not needed because TRC is
automatically adjusted. See “Setting
Color Tuning from The Front Panel” on
page 126.