Olympus DM-1 - Manual (Page 56)

56
Never use any SmartMedia card
other than one that has been
formatted with this unit or with a
CAMEDIA series Olympus digital
camera.
Other SmartMedia cards may not
perform as expected.
Notes
• If no action is taken within 8 seconds after step 4,
the menu will revert to the status of step 2.
• When a SmartMedia card is formatted, all the stored
data, including locked files, is erased.
• A SmartMedia card with a write-protect seal
attached to it cannot be formatted (
→
P.8).
• If an unformatted SmartMedia card is inserted,
“FORMAT YES?” will display automatically.
Formatting SmartMedia / Backlight
The backlight for the DM-1 will be activated
for approximately 15 seconds each time a
button is pressed. You can select whether or
not you would like to use the backlight.
1 Press the MENU button.
The menu opens (
→
P.33,52).
2 Press the FF/+ or
REW/– button
to open the backlight
setup screen.
3 Press the PLAY button.
The backlight setup process begins.
4 Press the FF/+ or REW/– button
to choose between ON and OFF.
5 Press the PLAY button to
complete the setup process.
6 Press the STOP button to close
the menu.
Backlight
Formatting SmartMedia