Olympus DM-1 - Manual (Page 37)

37
Disconnecting from Your PC
With Windows 98/98 SE
1 Confirm that the record/play indicator lamp on the DM-1 is not flashing.
Right-click on the Removable Disk icon in My Computer and select [Eject].
2 Disconnect the USB connecting cable.
With Windows Me/2000
1 Click on the on the task bar located at
the lower-right corner of the screen. Click
on [Stop USB Disk-Drive (E) ].
It will read [Stop USB Mass Storage Device-Drive
(E)] for Windows 2000. The drive letter will differ
depending on the computer being used.
2 When the Safe To Remove Hardware window appears, click on
.
3 Disconnect the USB connecting cable.
·······················································································································································
Notes
• NEVER remove the SmartMedia card or disconnect the USB connecting cable while the record/play indicator
lamp is flashing. If you do, the data on the SmartMedia card will be destroyed.
• Refer to the user's manual for your PC regarding the USB port or USB hub on your PC.
• Be sure that you connect the USB cable either directly to the USB port on your PC or the self-power (AC
adapter connection) USB hub.
• Be sure to push the cable connector all the way in. Otherwise, the DM-1 may not operate properly.
Connecting to
Y
our PC
1