Olympus DM-1 - Manual (Page 25)

25
VOICE
7
8
MENU
INDEX/EQ
REC
STOP
ERASE
7 Press the REC button to start
recording.
When the sound volume is lower than the
preset pause sound level, recording
automatically pauses after approximately 1
second, and “STANDBY VCVA” flashes on
the display. The record/play indicator lamp
glows when recording starts and flashes
when recording pauses.
8 Press the FF/+ or REW/– button to
adjust the pause sound level
during recording.
The pause sound level can be set to any of
15 different values. The higher the value,
the higher the sound sensitivity. At the
highest setting, even a small sound will
activate recording.
The VCVA pause sound level can be adjusted according to the
ambient (background) noise.
To ensure successful recordings, prior testing and adjustment
of the start/stop actuation level is recommended.
................................................................................................
Note
The start/stop actuation level also varies depending on the selected
microphone sensitivity mode (
→
P.23).
Using the V
ariable Control V
oice Actuator
(VCV
A)