Olympus DM-1 - Manual (Page 16)

16
Installing Software
Installing Software
1 Insert Olympus Voice & Music DM-1
Utility Software into the CD-ROM
drive.
The installation program will start
automatically. Once the program starts,
jump to step 4. If it does not, follow the
procedures in steps 2 and 3.
2 Click on the [Start] button and
select [Run].
3 Enter “D:/Setup.exe” in the [Open]
field and click on .
This is assuming the CD-ROM is in drive
D.
4 The installation Language
Selection dialog box opens.
Click on the desired language to select it.
5 Click on when the
Olympus Voice & Music DM-1
Utility Software opening screen
appears.
Be sure to confirm the following before installation:
• Exit all running applications.
• Eject the floppy disk if you are using one.
• You will need to input the licence number, so have the license number ID card handy.
• If you are running Windows 2000 on a network, you need to log on as an administrator.
6 Confirm the licensing agreement.
You must accept the terms of the License
agreement to install the Olympus Voice &
Music DM-1 Utility. If you accept them,
click on .
7 Select the installation destination
directory.
If you wish to select the installation
destination for the Olympus Voice &
Music DM-1 Utility Software, click on
to find the desired installation
destination. If you do not want to change
it, simply click on .
8 Installation Procedure screen.
To install software of your choice select
. To install both DSS Player and
MusicMatch Jukebox, select
then click on .
If you selected , skip to step 10.
Before you connect the USB cable to the DM-1 and your PC, you must first install the software. In
order to listen to music files, you must have MusicMatch Jukebox installed.