Olympus PPO-E02 - Manual (Page 16)

E-6
ቦ After inserting the camera, turn the PT- E series
case’s camera table lock lever all the way clock-
wise to lock the camera table. Then, push in the
zoom dial on the case and engage it with the
zoom gear attached to the lens. Turn the zoom
dial to confirm that it can control zooming.
MENU
ቧ Push in the PT- E series case’s power switch
dial and mode dial knob. Turn the power switch
dial and mode dial knob and confirm that they
can control the camera power ON-OFF and
mode switching. Connect the hot shoe mount
section of the hot shoe cable that has been
connected to the PT-E series case to the hot
shoe of the camera.
ቨ Attach the rear lid of the PT- E series case and
lock the four buckles (two diagonally located
buckles first, and then the other two diagonally
located buckles). Underwater shooting is now
possible.