Olympus PPO-E02 - Manual (Page 13)

3 Dismounting the PPO-E02
ቢ If any water is on the product, wipe it completely away and
make sure that the product is dry.
CAUTION: While dismounting the PPO-E02 from the case, water remaining on the PPO-E02 may splat-
ter on the lens or camera. If this happens, wipe the water off the lens and camera with a dry
cloth.
Make sure that the port is completely dry before dismounting.
ባ Holding the PT-E series case firmly with one hand, loosen the
PPO-E02 by turning it about 90 degrees counterclockwise. If
the PPO-E02 is attached too tightly to turn, wrap it with a piece
of rubber or similar non-slip material.
ቤ After loosening the PPO-E02, point its lens downward and
turn it further counterclockwise until it is separated from the
PT-E series case. Be careful not to drop the PPO-E02 or
PT-E series case.
E-3