Oki 2500 - Manual (Page 25)

19
Printing
2
To load envelopes:
1. Remove any print media from the paper tray.
2. Remove the output shelf and flip up the envelope feed
guide (➊).
3. Place the envelopes against the feed guide, address side
against the paper tray—flap to the left, then move the
paper guide lever over to touch the right edge of the
envelopes and replace the output shelf.
5. Make sure you have envelopes selected as the print media
in your software and in the printer driver (open the OKI
OKIJET 2500 printer setup dialog box — see page 15 —
and click the appropriate envelope size [#10, DL or C6] in
the Media size listbox of the Page tab).
➊