Oki B 4250 - Manual (Page 50)

OPERATION > 50
PCL emulation
The tabs available are the Setup Tab, the Job Options Tab and the Image
Tab.
Setup tab.
1. Paper size should be the same as the page size of your document
(unless you wish to scale the printout to fit another size), and
should also be the same as the size of paper you will feed into the
printer.
2. You can choose the source of the paper to feed, which may be
Tray 1 (the standard paper tray), Manual Feed, or Tray 2 (if you
have the optional second paper tray installed). You can also click
on the appropriate part of the screen graphic to select your
preferred tray.
If you select manual, the Weight selection box becomes visible.
You can leave the setting at Printer Setting or select as required.
3. A variety of document finishing options can be selected, such as
normal one page per sheet, or N-up (where N can be 2 or 4) for
printing scaled down pages at more than one page per sheet.