Oki B 4250 - Manual (Page 22)

OPERATOR PANELS > 22
apply to the B4100 printer, and the Network Menu does not apply to the
B4100 or B4250 printer.
CHANGING THE DISPLAY LANGUAGE
Carry out the following instructions to change the language that is
displayed in the Status Monitor.
1. Start the Status Monitor.
2. Select the Printer Setup tab.
3. On the Maintenance 2 tab, select the required language in the
[Language] dropdown menu.
4. Click [OK].
PRINTING MENU SETTINGS
The menu settings can be printed as a menu map as follows.
Using the control button
1. Press the control button to take the printer off-line.
2. Press and hold down the control button for at least two seconds,
but less than five seconds.
3. The printer prints a list of the menu settings and a demo print
page.
NOTE
Demo and menu pages can also be printed using the printer Status Monitor..