Oki MC160n - Manual (Page 77)

77 Registering Recipients
7
Press the Back key.
"
To delete another destination, repeat the procedure from step 5.
8
Press the or key to select FINISH, and then press the Enter key.
The destination is deleted from the favorite list.
"
To return to the Fax mode screen, continue pressing the Back key until
the Fax mode screen appears, or press the Stop/Reset key.
Speed Dialing
Registering a Speed Dial Destination
Frequently specified fax numbers (maximum of 220) can be registered as speed
dial destinations. In addition, batch transmission settings can be specified.
1
Press the or key to select UTILITY, and then press the Enter key.
"
For details on selecting a menu, refer to “General Procedure for Specify-
ing Settings in the Utility Menu” on page 36.
2
Press the or key to select DIAL REGISTER, and then press the Enter
key.
3
Press the or key to select SPEED DIAL, and then press the Enter key.
The SPEED DIAL screen appears.
4
Use the keypad to type in the speed dial number (1-220), and then press the
Enter key.
"
If LDAP search settings have been specified, a screen allowing MANUAL
SETTING
or LDAP SEARCH to be selected appears after the Enter key is
pressed. Select MANUAL SETTING, and then press the Enter key.
"
For details on entering/editing numbers, refer to “Entering Text” on
page 97.
"
If the destination is already registered with the specified speed dial num-
ber, REGISTERED! appears. Press the Back key to return to the DIAL
REGISTER screen, and then continue with step 3.
5
Enter the name of the speed dial destination to be registered, and then press
the Enter key.
"
Text up to 20 characters long can be entered for the name.
"
For details on entering/editing text and the characters that can be
entered, refer to “Entering Text” on page 97.