Oki MC160n - Manual (Page 24)

24 Control Panel and Configuration Menu
MACHINE SETTING
Specify settings related to machine operations and displays by selecting
MACHINE SETTING in the UTILITY menu.
Auto Panel Reset For details on specifying settings, refer to the
Printer/Copier/Scanner User’s Guide on the CD.
Energy Save Mode
LCD Contrast
KEY SPEED
Language
Buzzer Volume Settings OFF / LOW / HIGH
Select the volume of alarms and the beep that
sounds when a key is pressed.
Initial Mode Settings COPY / FAX
Select the mode that the machine starts up in or
returns to after the automatic reset.
TONER OUT STOP Setting ON / ON(FAX) / OFF
Select whether or not printing, copying and faxing
stop when the toner has run out.
If ON is selected, printing, copying and faxing stop
when the toner runs out.
If OFF is selected, printing, copying and faxing
continues even if toner has run out.
Printing, copying and faxing can continue, however,
the printing results are not guaranteed. If printing,
copying and faxing are continued, the message
TONER LIFE END/ CHANGE X TONER appears
and printing stops.
TONER LOW Settings ON / OFF
Select whether or not a warning message appears
when the toner is nearly empty.
Auto Continue Settings ON / OFF
Select whether to continue or stop printing if a paper
size error occurs during printing. If ON is selected,
printing continues, even if a size error occurs. If OFF
is selected, printing stops if a size error occurs.
DUPLEX SPEED For details on specifying settings, refer to the
Printer/Copier/Scanner User’s Guide on the CD.
Calibration For details on specifying settings, refer to the
Printer/Copier/Scanner User’s Guide on the CD.