Oki C330 - Manual (Page 14)

14 – C330/C530 Paper Recommendations
Paper Recommendations
Your printer will handle a variety of print media, including a
range of paper weights and sizes, labels and envelopes. This
section provides general advice on choice of media, and
explains how to use each type.
The best performance will be obtained when using standard 20-
24 lb. US Bond (75-90 g/m²) paper designed for use in copiers
and laser printers.
Use of heavily embossed or very rough textured paper is not
recommended.
Pre-printed stationery can be used, but the ink must not
offset when exposed to the high fuser temperatures used in the
printing process.
Envelopes
Labels
CAUTION!
Envelopes should be free from twist, curl or other
deformations. They should also be of the
rectangular flap type, with glue that remains
intact when subjected to hot roll pressure fusing
used in this type of printer. Window envelopes
are not suitable.
CAUTION!
Labels should also be of the type recommended
for use in copiers and laser printers, in which the
base carrier page is entirely covered by labels.
Other types of label stock may damage the
printer due to the labels peeling off during the
printing process.