Oki C330 User Manual

Page 116

116

– C330/C530

Troubleshooting

• To remove a sheet just entering the fuser (1), separate

the trailing edge of the sheet from the belt (2), push the

fuser pressure release lever (3) towards the front and

down to release the fuser’s grip on the sheet, and

withdraw the sheet through the drum cavity area. Then

allow the pressure release lever to rise again.

• To remove a sheet in the fuser:

Note:

If the sheet is well advanced into the fuser (only a

short length is still visible), do not attempt to pull it

back.