Oricom M5500 Series - Manual (Page 33)

MENU SETUP
31
1
. Enter “PABX setting” mode (Refer to the operation in “Audio setting” section
on P28).
2
. Press ! or key to select the item that you wish to set. The display is
shown in this order: Key PIN Prefix Number Prefix dashes to show
that you have reached the end of the menu.
3
. Press OK key to enter the item that you wish to set.
Prefix setting
During PABX setting mode,
1
. Press ! or key to select “Prefix” from the display.
2
. Press OK key to enter the mode. “Prefix-Off” appears on the display.
3
. Press ! or key to switch between “Prefix-Off/On” mode.
4
. Press OK key to confirm the selection and return to the previous mode.
Prefix number setting
During PABX setting mode,
1
. Press ! or key to select
“Prefix Number” from the display.
2
. Press OK key to enter the mode. The display
on the right is shown.
3
. Press the numeric keys to enter a new number (up to 6 digits) or press ! /
key to select the desired digit’s position.
4
. Press OK key to confirm and return to the previous mode.
Key lock's PIN
During PABX setting mode,
1
. Press ! or key to select “Key PIN” on the display.
2
. Press OK key to enter the mode. The display
on the right is shown.
3
. Enter 0000 (default value).
4
. Press OK key.
5
. Press the numeric keys to enter a new number or press ! / key to select
the desired digit’s position.
6
. Press OK key to confirm and return to the previous mode.
PABX settings