Oricom M5500 Series - Manual (Page 30)

MENU SETUP
28
Audio settings
During standby mode,
1
. Press OK key to enter the menu set mode.
2
. Press ! or key to select the item
“Audio” from the display.
3
. Press OK key to enter Audio setting. The
display on the right is shown.
4
. Press ! or key to select the item that you wish to set. The display is
shown in this order: Ring Tone Ring Loudness Key Tone dashes to
show that you have reached the end of the menu.
5
. Press OK key to enter the item that you wish to set.
6
. Press key to return to the previous menu.
Menu Setup
Key lock
During standby mode, on the base unit.
1
. Press OK key to enter menu set mode.
2
. Press ! or key to select the item that you wish to set. The display is
shown in this order: Key Lock Audio TAD setting PABX setting
Setting.
3
. Press OK key to enter the item that you wish to set or press key to exit
menu set mode.
Before setting key lock, you have to input a 4-digit PIN code first. The default setting is
0000.
1
. Enter 0000.
2
. Press OK key, the display on the right is
shown.
3
. Press ! or key to select “Off” or “On”
from the display.
4
. Press OK key to confirm and return to the previous mode.
5
. Press key to return to the main menu.
Note: All the previously stored settings are shown after opening the submenu.