Oricom M5500 Series - Manual (Page 20)

CALLER ID OPERATION
18
If you subscribe to your telephone operators service (charges may apply), numbers
of the incoming calls will be displayed on the screen and stored in the call log (please
consult your telephone service provider for details).
The M5500 series can store the last 30 calls including: the record number, date/time,
and phone number (up to 20 digits for the cordless handset and up to 24 digits for the
answering machine).
When an external call comes in, the display is shown below:
Note: If there is an identical phone number stored in the
phonebook, the number’s corresponding phonebook
name is displayed.
When you have new/unanswered calls, CLIP icon flashes on the base and flashes on the
cordless handset. If a call has been answered, then the call is set to old call.
Review Caller ID records
With cordless handset
During standby mode,
1
. Press \
2
. Press key to view the call number.
3
. Press key again to see the Date/Time when the call was received.
With base unit
During standby mode,
1
. Press key to show the Call list.
2
. Press ! or key to view other records.
If the call has recorded messages, the icon
flashes on the display.
3
. Press key to play the message.
Caller ID Operation