Ositech comm Trumpcard Data/Fax Modem - Manual (Page 74)

4 - 42 Trumpcard 14400/28800 Modem
Section Four
S36 = 4 An MNP connection is attempted, and if it fails, the
modem disconnects.
S36 = 5 An MNP connection is attempted, and if it fails, a
Direct mode connection is established.
S36 = 6 Reserved.
S36 = 7 An MNP connection is attempted, and if it fails, a
Normal mode connection is established.
S37 — Desired Telco Line Speed
Range 0-12
Default 0
This register determines the desired telco line speed if the N0 command is
in effect.
If an invalid number is entered, the number is accepted into the register,
but S37 will act as if the default value is entered.
S37 = 0 Attempt automode connection.
S37 = 1-3 Attempt to connect at 300 bps.
S37 = 4 Reserved.
S37 = 5 Attempt to connect at V.22 1200 bps.
S37 = 6 Attempt to connect at V.22bis 2400 bps.
S37 = 7 Attempt to connect in V.23 75/1200 mode.
S37= 8 Attempt to connect at V.32bis/V.32 4800 bps
S37=9 Attempt to connect at V.32bis/V.32 9600 bps
S37=10 Attempt to connect at V.32bis 12000 bps
S37=11 Attempt to connect at V.32bis 14400 bps
S37=12 Attempt to connect at V.32bis 7200 bps.
S37=15 Attempt to connect at V.FC 14400 bps
S37=16 Attempt to connect at 16800 bps *
S37=17 Attempt to connect at 19200 bps *
S37=18 Attempt to connect at 1600 bps *
S37=19 Attempt to connect at 24000 bps *
S37=20 Attempt to connect at 26400 bps *
S37=21 Attempt to connect at 28800 bps *
* Only applicable to Trumpcard 28800 version