Ositech comm Trumpcard Data/Fax Modem - Manual (Page 60)

4 - 28 Trumpcard 14400/28800 Modem
Section Four
Examples
When a BREAK is received from the communications software when
connected to a remote modem, the modem takes the following action:
AT\K0,2,4 Modem enters the command mode (waiting for AT)
without sending a BREAK to the remote modem
AT\K1 Modem clears the terminal and modem buffers and
sends a BREAK to the remote modem
AT\K3 Modem does not clear the buffers but sends a
BREAK to the remote modem
AT\K5 Modem sends a BREAK to the remote modem in
sequence with any transmitted data.
When a BREAK is received from the remote modem during a non-error
correction connection, the modem takes the following action
AT\K0,1 Modem clears the terminal and modem buffers and
sends a BREAK to local communications software
AT\K2,3 Modem does not clear buffers but sends a BREAK
to the local communications software
AT\K4,5 Modem sends a BREAK in sequence with any data
being buffered, to the local communications
software
When a \B command is received from the communications software during
a connection and in the Command mode, the modem takes the following
action:
AT\K0,1 Modem clears the terminal and modem buffers and
sends a BREAK to the remote modem.
AT\K2,3 Modem does not clear buffers but sends a BREAK
to the remote modem.
AT\K4,5 Modem sends a BREAK in sequence with any data
being buffered, to the remote modem.