Ositech comm Trumpcard Data/Fax Modem - Manual (Page 37)

User’s Guide and Reference 4 - 5
Modem Command Reference
Command Title Default
&Mn Communication Mode (&Qn) *
&Pn Dial Pulse Ratio 0 *
&Qn Communication Mode 5 *
&Rn RTS/CTS Option 0 *
&Sn DSR Option 0 *
&Tn Test And Diagnostic 4 *
&V View Configuration and User Profiles none
&Wn Store User Profile none
&Yn Designate Default User Profile 0 *
&Zn=x Store Phone Number none
\Bn Transmit Break 3
\Gn Modem-to-Modem Flow Control 0
\Kn Break Control 5
\Nn Operation Mode Control none *
%Cn Compression Control 1 *
%En Disable/Enable Line Quality Monitor 0
%L Report Received Signal Level none
%Q Report Line Signal Quality none
-Kn MNP Extended Services 1
*Hn Link Negotiated Speed 0 *
)Mn Transmit Level Adjust for Cellular 0
Connection
:En Compromise Equalizer 1
@Mn Initial Cellular Power Level 0
[n Event Based Command None
* Indicates command is saved in Non-Volatile Memory