Olympus CAMEDIA C-2 ZOOM - Manual (Page 85)

84
Ca
mera
se
tt
ings
Viewing a picture immediately after shooting (Rec View)
You can view the picture you have just taken on the monitor for 3 seconds
while it is being recorded.
1
Display the top menu in the shooting mode.
• Open the lens barrier.
• Press .
2
Press to select MODE MENU.
3
Press to select the SETUP tab, then press .
4
Press to select REC VIEW,
then press .
5
Press to select ON.
Rec View is set.
To close the menu, press
twice.
Rec View settings
ON : The picture being recorded is displayed on the monitor. This is useful for a brief
check of the picture you have just taken. Pressing the shutter button halfway during
Rec View lets you resume shooting immediately.
OFF : The picture just taken is not displayed. This is useful when you want to prepare for
your next shot while the previous picture is being recorded.
• The Rec View setting remains even when the lens barrier is closed.
• During sequential shooting, Rec View is disabled.
CAM
PIC
CARD
SEtUP
REC VIEW
ALL RESEt
CAM
PIC
CARD
SEtUP
ALL RESEt
REC VIEW OFF
ON