Odyssey Electronics Marine GPS System - Manual (Page 6)

2.0 SPECIFICATIONS
Weight: 2.5 lbs
Dimension in inches (H X W X L): While in cradle - 9 1/2” X 4” X 6”
Out of cradle – 7” x 4” x 3”
Laser Classification (Per 60825): Laser Diode Class 4 Laser Device
Wavelength: Laser 810 nm ±10 nm
Aiming Beam 650 nm ±10 nm
Beam Divergence: 9 degrees ± 1 degree
Power Range: 100 mw to 3 Watts
Hertz Rate in Pulsed Mode: fixed 10 Hz
Pulse Duration: fixed 0.05 seconds
Duty Cycle: pulsed mode 50%
continuous wave 100%
Aiming Beam (3 mW ): Yes
Audible Notification: Yes
Visual Notification: Yes
Power Requirements: 110 - 120 VAC @ 60 Hertz
220 - 240 VAC @ 50 Hertz
Amperage: 1.5 Amps @ 110-115 V AC
0.75 Amps @ 210-230 V AC
Battery: Rechargeable lithium polymer
45 minutes continuing lasing time
8 hours stand by time – laser on, not being charged by cradle or AC power
Wireless Foot Pedal: Frequency: 2.4 GHz
Power source: Battery 9 volt Lithium
2.1 DELIVERY SYSTEM SPECIFICATIONS
» Handpiece assembly with autoclavable sleeves
» Disposable, unit-dose fiber silica tips for the handpiece
• 50 per box – Standard length tips (6 mm)
• 50 per box – Perio length tips (9 mm)
• 25 per box – Non-contact tips (3.5 mm)
» Laser Aperture – Custom ST adaptor
6 T h e L e a d e r i n D i o d e L a s e r s .
SPECIFICATIONS
Section 2