Laser assembly instructions – Odyssey Electronics Marine GPS System User Manual
Page 12
3.1.5 Inserting the unit dose fiber
tip into the handpiece
Remove a unit dose fiber tip from
its package, remove the plastic
protective cap, and snap it into the
handpiece. Figs 3.1.5a, 3.1.5b and
3.1.5c. Avoid placing your finger
on either end of the handpiece
tips as the tips are gamma irradiated
and have to be clean for optimal
performance and safety. Use gloves
while handling the tips as natural
oils on the fiber or fiber connection
can burn and diminish the effective
transmission of radiant energy
once the laser is installed.
12
T h e L e a d e r i n D i o d e L a s e r s .
LASER ASSEMBLY INSTRUCTIONS
Section 3
Fig 3.1.5d
Fig 3.1.5b
Fig 3.1.5c
Fig 3.1.5a