Odyssey Electronics Marine GPS System - Manual (Page 14)

3.1.8 Emergency Shutdown Switch
Before you activate the laser, make
sure the red Laser Stop button is in
the depressed position. The laser will
activate only with the button in the
depressed position. If the laser needs
to be stopped quickly, pushing and
releasing the red Laser Stop button will
immediately shut the laser off.
The Safety Alert Window will appear
on the screen if the button is released.
3.1.9 Powering up the Laser
Turn the laser on using the main power switch on the side of the laser. Fig. 3.1.9
3.1.10 Enter the digital key
The Navigator has a keyless entry
system for security purposes. After
turning the power to the “On” position,
the Navigator Screen will appear.
Touch the “Enter” key. Fig. 3.1.10a
The Login screen will appear, touch
the screen and input the digital key
code 1234 and touch the “Enter” key.
Fig 3.1.10b
14 T h e L e a d e r i n D i o d e L a s e r s .
LASER ASSEMBLY INSTRUCTIONS
Section 3
Fig 3.1.8a Fig 3.1.8b
Fig 3.1.9
Button depressed—
laser will activate Button not depressed—
laser will not activate
Fig 3.1.10a Fig 3.1.10b