Olympus DS-2300 - Manual (Page 41)

41
3
REC MODE
MIC SENSE
EXIT
SUB MENU
VCVA
LOCK
BEEP
FORMAT
EXIT
BACKLIGHT
TIME&DATE
CONTRAST
Select SP or LP mode (
☞ P.23).
Notes
• If you press the STOP button or FOLDER/MENU button during a menu setup operation, the recorder will
stop and apply the items that were set to that point.
• The recorder will stop if you leave it idle for 3 minutes during a menu setup operation, when a selected item is
not applied.
• You can set the time and date on the recorder from your PC using DSS Player software ( ☞ P.42).
Time/Date setting. Hour, minute, year, month
and day (
☞ P.13).
Recorder formatting (
☞ P.35).
LCD contrast adjustment. Select the level
from 1 to 12 (
☞ P.38).
System sounds setting. Select ON (enabled)
or OFF (disabled) (
☞ P.40).
Backlight setting. Select ON (enabled) or
OFF (disabled) (
☞ P.39).
Press and hold the FOLDER/MENU button for 1 second or longer.
Press the FF
button or REW
button.
VCVA setting. Select ON (enabled) or OFF
(disabled) (
☞ P.24).
Microphone sensitivity setting. Select
between CONF (high-sensitivity mode) or
DICT (low-sensitivity mode) (
☞ P.22).
Press the
REC button.
Returns to the MENU.
Exit MENU and return to STOP mode.
Locking files setting. Select ON (locked) or
OFF (unlocked) (
☞ P.31).
Switches to the SUB MENU.
MENU
SUB MENU
Menu Setting Method
Menu Setting Method
Each item of the menu list can be set by the following method.