Oki C3400 - Manual (Page 12)

Network User’s Guide for C3400n and C3530 MFP
Network Configuration - 12
U
SING
SNMP
The printer and network card can be managed via a standard SNMP
management station. The network card supports SNMPv1, MIB-II and Oki
Data Private MIB. To enable correct management from an SNMP management
station, the Oki Data Private MIB needs to be added to that management
station. Please refer to the SNMP manager documentation for more
information on adding MIBs to SNMP management stations.
You can download the Oki Data Private MIB file from the Oki Printing Solutions
website at http://www.okiprintingsolutions.com. Refer to the readme file in
the “MIB” folder for further information.
The printer’s trap address can be set in five places using TCP/IP.
Printer trap settings can be made through the Web browser.
O
KI
LPR
PRINTING UTILITY
(W
INDOWS ONLY
)
The Oki LPR Utility is for Oki printers which support TCP/IP. This utility allows
for the printing of data to printers connected to a network via TCP/IP. The
utility redirects printing data to the LPR port of the specified IP address.
S YSTEM R EQUIREMENT
Windows XP/2000/Me/98/NT4.0/Windows Server 2003 with TCP/IP support
and Oki printers that support TCP/IP.
The Oki LPR utility requires that the TCP/IP protocol is installed on your
Windows operating system. To install the TCP/IP protocol, consult your
Windows manual.
I NSTALLING THE O KI LPR UTILITY
NOTE:
Windows XP/2000/NT 4.0 requires administrator privileges.
If you installed the printer driver using the “Install Driver” link on the product
CD, Oki LPR may have already been installed. However, if you installed the
driver using the “Add Printer wizard”, carry out the following steps:
1. Insert the Software CD-ROM into the CD-ROM drive. The Setup Utility
starts automatically. If it does not start, double-click setup.exe on the
CD-ROM.
2. Select the appropriate setup language and click I agree to accept the
terms of the Software Licence Agreement.
3. Select Software Utilities -> Install LPR utility.