Omega Vehicle Security Wireless Sensor System zSeries - Manual (Page 16)

10
2.2a Dimensions and Mounting - End Device
(zED-P/-LCD/-LCD-AA/-CCELL/-H)
Figure 2.2a Mounting the End Device (zED-P/-LCD/-AA/-CCELL/-H)
Dimensions are in Inches
with MM in [ ].
Material: Polycarbonate
Makrolon
Protection: NEMA4/IP65
rated housing 1) Position unit where required.
Mark and drill holes as
required, using a #6 screw.
2) Attach antenna (refer to
Section 5 for
Environmental/Operating
Conditions) and attach power
supply.