Oki MICROLINE 320 TURBO - Manual (Page 31)

|
User’s Guide: English 31
7 Install the paper separator. Place the wire guide (1) on the
pull-up roller assembly (2).
32T-31.eps
8 Press FF/LOAD. The paper feeds into the printer.
! The factory default setting for the Top of Form (where
the printing should begin) is one inch down from the top
of the page. To change the setting, see “Using Your
Printer, Top of Form (TOF).”
Top Feed (Single Sheets)
Use the single-sheet path for letterhead stationery, memos,
and individual envelopes.
! If you have continuous-form paper in the path, press
PARK to remove it before loading single sheets.
1 Make sure the printer is on and deselected (SEL light off).
2 Place the paper lever in the position marked “TOP.”
32T-12.eps
3 Open the carriage cover. Raise the paper separator to the
single-sheet position.
32T-32.eps
QUIET PARK TEAR FF/LOAD LF
SEL SEL
POWER ALARM
MENU
GROUP
EXIT
ITEM SET PRINT
MENU SHIFT
TOF
Micro Feed Up
Micro Feed Down PRINT QUALITY
CHARACTER PITCH
HSD NLQ UTL
SSD
10 12 15 17 20 PROP
2
1