Ribbon cartridge, Installing, Replacing – Oki MICROLINE 320 TURBO User Manual
Page 25: Ribbon shield, Take-up knob (ribbon cartridge)
|
User’s Guide: English
25
Ribbon Cartridge
1 Make sure the printer is turned OFF.
2 Center the printhead (1).
32T-18.eps
3 If you are replacing the ribbon: swing the front of the
cartridge up off the printhead, then lift the cartridge out
and discard it.
!
Caution! The printhead may be HOT!
32T-19_up.eps
4 Unpack the ribbon cartridge.
!
Important! DO NOT remove the ribbon shield from the
ribbon!
1
Ribbon Shield
2
Grip Points
3
Take-up Knob
32t-20.eps
5 Install the new ribbon cartridge.
32T-19dn.eps
6 Turn the take-up knob in the direction of the arrow to take
up any ribbon slack.
32t-39.eps
1
3
2
1
This manual is related to the following products: