Output Solutions C I - 8 0 6 0 - Manual (Page 74)

Description of the Individual Menu Items
4-10
S DSR/CTS MODE (Only indicated if the serial interface is selected)
Selectable are: IGNORE DSR+CTS, DSR+CTS ACTIVE, CTS ACTIVE,
or DSR ACTIVE.
S I/F BUFFER
Buffer size in Kbyte. The maximum (factory setting) size is 64 Kbyte.
S LANGUAGE
The operator panel may display its messages in three languages. Select one
out of the following: ENGLISH, DEUTSCH, or FRANCAIS.
S RECALL FACTORY
All standard default settings of the firmware will be restored. The contents of
Page Counter and the Paper-in Adjust will not be changed. Use the function
SAVE MENU if the standard settings shall be stored permanently.
S PROGRAM UPDATE
A new firmware version can be down loaded from the host system via the
interface cable. All parameters will be reset to their factory default value.
S MENU ACCESS
There are two possibilities to define the user’s access rights to the menu.
S
FULL ACCESS All functions can be used (default)
S NO ACCESS The menu is not accessible at all. Only the menu item
TEST MODES is available.
Note: It is the system manager’s responsibility to grant access to the menu
when NO ACCESS was selected.