Connecting to the system, Parallel/serial interface – Output Solutions C I - 8 0 6 0 User Manual
Page 35
Getting Started
1-19
1.10
Connecting to the System
Parallel/Serial Interface
S
Switch the printer and the computer OFF.
S
Connect the interface cable coming from the computer to the printer's
parallel (1) or serial (2) port.
The following values are default settings, see test printout PRINT MENU on
S
Word Length:
8 bit
S
Baud-Rate
9600 BPS
S
Parity Bit:
Even
S
Protocol
DTR
S
DSR/CTS Mode
Ignore DSR+CTS
S I/F Buffer 64 K-Byte
After powering the printer ON both interfaces, serial and parallel, are available
for data transfer because of the shared mode. The port to which data is sent
becomes active automatically.
For changing the parameters, see Appendix A System Interface Description
1.11
Installing the Printer Drivers
S
You will find the printer drivers on the CD-ROM.