Oricom Pro900 - Manual (Page 37)

35
Using the Answering Machine
Answering Machine
Your answering machine can be ready for use within a
few seconds of plugging in the telephone line cord and
switching on the mains power. Just follow the steps in
this section to set up and use your answering machine.
Switch on/off
Switches the answering machine on
or off. The current answer mode is
announced.
Set the voice prompt language
x 2
Open the answering machine menu
or , Select ‘‘Language’’
or , Select ‘‘German’’, ‘‘French’’ or ‘‘English’’
and confi rm
Set the answer mode
Switch the answering machine on
2 sec To change the mode between ‘‘Answer &
Rec.’’, and ‘‘Answer Only’’
Record your outgoing message (OGM)
Your answering machine comes with a default outgoing
message but you can record your own personal OGM of
up to 2 minutes long.
2 sec Record your message after the beep
Press to end your recording
Check your OGM
The current OGM is announced
To return to the factory pre-set OGM, just press and
hold the key whilst the current OGM is playing.
Set the answer delay
x 2
Open the answering machine menu
or , Select ‘‘Answer Delay’’
3 rings The current setting is shown
or , Select and confi rm the number or rings
(2-9) or ‘‘Time Saver’’.