Oricom Pro900 - Manual (Page 19)

17
Using the Menu, Telephone Base
Changing the Profi le ‘‘Equaliser’’ setting
or , Select ‘‘Equaliser’’
or , Select and confi rm
Press the key to return to standby.
Selecting a Profi le for use
Incoming calls
When you receive an incoming call and before you
answer the telephone, press the M1, M2 or M3 key for
the profi le you wish to use. The display will confi rm the
profi le that has been selected and you can answer the
call as normal.
Outgoing calls
When you wish to make an outgoing call, press and
hold the M1, M2 or M3 key for the profi le you wish to
use. The display will confi rm the profi le that has been
selected and you can now make your outgoing call as
normal.
If you do not dial your outgoing call within 30 seconds
of pressing the M1, M2 or M3 key, the selected profi le
will timeout and the default telephone settings will be
used for the call.
User profiles cannot be selected in Handsfree mode.
You must lift the handset.
Ringer tone
There are 10 different ringing melodies available for
External and Internal calls.
, or , Open the Menu, select ‘‘Ringer Tone’’
or , EXT Select and confi rm the melody to
Melody or INT change
Melody,
Melody 8 The current setting is shown
or , Select and confi rm a ringing melody