To use set ip – Ricoh Aficio BP20N User Manual
Page 53

2.34
S
ETTING
U
P
Y
OUR
P
RINTER
To Use Set IP
1
From the Start menu, select Aficio BP20 Series in
Programs, and click Set IP.
2
Click
to find printer on the local network, or click
and type the printer’s MAC address.
N
OTE
: To confirm the MAC address, see the NETWORK PRINTER
CARD TEST PAGE. The NETWORK PRINTER CARD TEST PAGE will
be printed after the Configuration Page. To Print the Configuration
Page, refer to “Printing Configuration Pages” on page 5.8.
3
Type IP address, Subnet Mask and Default Gateway, and
then click [Config].
4
If it is successfully completed, the printer prints NETWORK
PRINTER CARD TEST PAGE.
This manual is related to the following products: