4 using the on-screen menus, Using the on-screen menus, Pre l iminar y – Runco CX-52HD User Manual
Page 37
Runco CX-52HD/CX-57HD Owner’s Operating Manual
25
PRE
L
IMINAR
Y
4.4
Using the On-Screen
Menus
To use the on-screen menus:
1.
Press MENU to display the Main Menu.
2.
To select a menu item, use the up- or down-arrow buttons (
,
) on the remote
control to highlight it.
3.
Press ENTER or the right-arrow button (
) to access that menu.
4.
Use the up- or down-arrow buttons (
,
) to select the setting you want to change.
Then, press ENTER or the right-arrow button (
).
5.
Press the right- or left-arrow button (
,
) to change that setting.
6.
To return to the previous menu, press MENU or (
).
The Crystal Series LCD OSD menus are arranged hierarchically, as shown in Figure 4-1.
Depending on the selected input source and/or signal characteristics, some menu options
may not be available.
1. The maximum available resolution and vertical frequency is
1920x1080/60Hz or the maximum supported by your video
card, whichever is lower. You can get the best picture at
1920x1080/60Hz.
2. The Crystal Series LCD supports 24-bit color (16,777,216
possible colors).
Note