2 quick setup, Table 3-1 . installation overview, Quick setup – Runco CX-52HD User Manual
Page 26: Pre l iminar y
14
Runco CX-52HD/CX-57HD Owner’s Operating Manual
PRE
L
IMINAR
Y
3.2
Quick Setup
Table 3-1 gives a quick overview of the Crystal Series LCD installation process. The
sections following this one provide detailed instructions.
Installation should be performed by a qualified custom video
installation specialist.
Table 3-1. Installation Overview
Step
Procedure
For Details, refer to
page...
1
Mount the Crystal Series LCD on a wall (optional)
2
Connect signal sources to the Crystal Series LCD
3
Connect external controller to RS-232 port (optional)
4
Apply power to the Crystal Series LCD
5
Change the OSD language
6
If using the Crystal Series LCD with a PC, adjust PC display
properties
7
Display calibration: adjust the following for each input;
save settings when finished:
• Brightness
• Contrast
• Color level
• Tint
• Input position
Note