Rosewill G03-ATI9000 - Manual (Page 8)

5
Connecting your monitor(s)
The RADEON Series, depending on the graphic card configuration, provides hardware
support for one VGA monitor and one flat panel monitor, or two VGA monitors using a DVI-
I-to-VGA adapter*, or only one VGA monitor. It also provides TV Output via a S-Video out
connector.
Plug the monitor cable into your card (if you are running multiple monitors, connect their
cables to the appropriate connectors), then turn on the PC and monitor(s).
To connect a flat panel directly to your card, use the DVI-I connector. To connect a VGA
monitor to the DVI-I connector, plug a DVI-I-to-VGA adapter* into the DVI-I connector,
then plug your monitor cable into the adapter*, as shown below.
When you use multiple monitors with your card, one monitor will always be Primary. Any
additional monitor(s) will be designated as Secondary.