Rosewill G03-ATI9000 - Manual (Page 14)

11
Catalyst™ Software Suite
The following section provides an explanation of each ATI tab available after installing the
Catalyst™ Software Suite.
ATI Displays Tab
The ATI Displays tab provides the multi monitor features. Here you can enable/disable
display devices and swap the assignment of Primary and Secondary displays.
Features presented in the following pages may not be supported in all operating systems and/or may appear
differently.
Enabling/Disabling Secondary Displays
1 Access the Windows ® Control Panel. Double-click Display.
2 Click on the Settings tab and then the Advanced... button.
3 Click on the ATI Displays tab.
4 Click the enable/disable button for the display device you want to enable/disable.
5 Click OK or Apply to save the changes.
Enabling Extended Desktop Mode
1 Access the Windows ® Control Panel. Double-click Display.
2 Click on the Settings tab.
3 Click the monitor icon for the display onto which you want to extend your desktop.
4 Click Yes to enable the selected display.
5 Checkmark the Extend my Windows desktop onto this monitor check box (Windows ®
may automatically place it there).
6 Click OK or Apply to save the changes.
Dynamic Display Reassignment
You can change the assignment of your Primary and Secondary display on the fly, without
rebooting. However, before you can change the assignment of the Primary display, at least
one Secondary display must be enabled, and Extended Desktop mode must be enabled.
To enable a Secondary display, refer to the section Enabling/Disabling Secondary Displays.
To enable Extended Desktop Mode, refer to the section Enabling Extended Desktop Mode.
1 Access the Windows ® Control Panel. Double-click Display.
2 Click on the Settings tab and then the Advanced... button.