Rosewill G03-ATI9000 - Manual (Page 7)

4
the motherboard. For more information, see your computer documentation.
4.
Locate the AGP slot. If necessary, remove the metal cover from this slot; then
align your RADEON™ with the AGP slot, and press it in firmly until the card
is fully seated.
5.
Replace the screw to fasten the card in place, and replace the computer cover.
6.
Plug the display cable into your card; then turn on the computer and monitor. If
your RADEON™ came with a DVI connector, you can connect a flat panel
display to the appropriate connector, as shown below.
You are now ready to proceed with the installation of the ATI driver. For detailed
instructions, select your operating system from the list on page 7 to 9.
Grasp the
RADEON™ by the
top edge and
carefully seat it into
the AGP slot.
Ensure that the
metal contacts are
Completely
pushed into the
slot.
Make sure all
cables are securely
connected.
RADEON CARD
RADEON CARD