beautypg.com

Changing the volume balance in dual play, Changing the depth of the reverb, Checking the depth of the reverb effect – Roland MP-500 User Manual

Page 27: Changing the depth of the chorus, Checking the depth of the chorus effect, Convenient functions, Press and hold the [reverb] button, Press and hold the [chorus] button

background image

27

Convenient Functions

Changing the Volume

Balance in Dual Play

You can change the volume balance between the two layered

sounds in Dual Play (p. 16).

When the Keyboard is turned on, the response is set to

“Standard.”

This setting remains in effect until the keyboard’s power is

turned off.

While holding down the [Demo Song/Key

Touch] button, press the corresponding

note (C7–E7).

fig.5-04.e

\

Key

Description

C7

Of the two selected tones, the sound assigned to

the left Tone button sounds louder.

C#7

Of the two selected tones, the sound assigned to

the left Tone button sounds somewhat louder.

D7

Standard

D#7

Of the two selected tones, the sound assigned to

the left Tone button sounds somewhat quieter.

E7

Of the two selected tones, the sound assigned to

the left Tone button sounds quieter.

If you have recorded in Dual Play (p. 16), you can use the

operation above to play back the Performance with a

different volume balance between the two layered tones.

Changing the Depth of the

Reverb

The depth of the Reverb Effect (p. 18) can be adjusted.

There are eight levels of depth from which to choose.

This is set to “4” when the power is turned on.

Holding down the [Reverb] button, press
any Tone button.

fig.7-15.e

Checking the depth of the Reverb
Effect

Press and hold the [Reverb] button.

The Tone button indicators will blink to indicate the

selected depth.

Changing the Depth of the

Chorus

The depth of the Chorus Effect (p. 19) can be adjusted.

There are eight levels of depth from which to choose.

This is set to “4” when the power is turned on.

Holding down the [Chorus] button, press
any Tone button.

fig.7-16.e

Checking the depth of the Chorus
Effect

Press and hold the [Chorus] button.

The Tone button indicators will blink to indicate the

selected depth.

Demo Song

C7~E7

Reverb

Chorus

Strings

Piano 1

Piano 2

chord

Harpsi-

phone

Organ

Vibra-

Pipe

Piano 1

Electric

Piano 2

Electric

Tone

1

2

3

4

5

6

7

8

More strongly

reverb

While holding down

Press one of these buttons

Reverb

Chorus

Strings

Piano 1

Piano 2

chord

Harpsi-

phone

Organ

Vibra-

Pipe

Piano 1

Electric

Piano 2

Electric

Tone

While holding down

Press one of these buttons

1

2

3

4

5

6

7

8

Deeper and

more spacious

chorus

MP-500.e.book 27 ページ 2003年6月11日 水曜日 午前9時46分