Runco PLASMAWALL XP-OPAL65DHD - Manual (Page 77)

Maintenance and Troubleshooting
PlasmaWall XP Series Installation/Operation Manual 61
PRE
L
IMINAR
Y
RGB-HD images appear
“noisy.” • Clock and Phase settings
need adjustment.
• Adjust Clock and Phase
settings (refer to Input
Color on page 51).
Computer images do not dis-
play correctly. • The resolution and
frequency of the video
card in the computer are
not compatible with the
PlasmaWall.
• Select a compatible
resolution and vertical
frequency (refer to
Supported Timings on
page 76).
The image is too large or too
small. • Image size needs
adjusting.
• Adjust the image size (refer
to Input Position on
page 45).
Table 5-1. Troubleshooting Chart (continued)
Symptom Possible Cause(s) Solution