Installer – Russound SIX-SOURCE CONTROLLER CAM6.6 User Manual
Page 60
c. Selected: Default
Default selects the same device type and device code previously
(Deflt)
setup in BASIC SETUP. Procedure advances to KEY FUNCTION
(step 5)
d. Selected: Macro:
(To build macros, see Macro Editor page 62)
(Macro)
i. MACRO -
Macro loads a series of commands which are processed when
(Macro)
activated.
ii. MACRO ID –
Enter the macro ID number. Menu advances to POWER OFF CMD
(MacID)
(step 6)
e. All Other Selections:
Procedure advances to DEVICE CODE (step 4)
4. DEVICE CODE –
Source component code for IR control.
(DevCd)
5. KEY FUNCTION –
Select a function (Play, Enter, etc.).
(KeyFn)
6. POWER OFF CMD –
Tells the controller to turn off the selected source equipment (by
(OfCmd)
SOURCE NUMBER) when the last of the UNO System Keypads is
turned off. If “no,” procedure advances to SAVE CHANGES (step 10)
7. COMMAND TYPE –
Select the type of source command (e.g., CD, TV, etc.).
(CmdTp)
a. Selected: Learned IR
Choose Learned IR if the pre-programmed IR code library does
(LrnIR)
not support the source component.
i. LEARNED SRC –
Select the learned source bank to be assigned to the source
(LnSrc)
component. Procedure advances to KEY FUNCTION (step 9)
b. Selected: Unassigned
The Power Off command is cleared. Procedure advances to
(Unasg)
SAVE CHANGES (step 10)
c. Selected: Default
Default selects the same device type and device code previously
(Deflt)
setup in BASIC SETUP. Procedure advances to KEY FUNCTION
(step 9)
d. Selected: Macro:
(To build macros, see Macro Editor page 62)
(Macro)
i. MACRO –
Macro loads a series of commands which are processed when
(Macro)
activated.
ii. MACRO ID –
Enter the macro ID number.Menu advances to SAVE CHANGES
(MacID)
(step 10)
(continued next page)
INSTALLER
INSTALLATION MENU
60