Periph setup (persu), Installer – Russound SIX-SOURCE CONTROLLER CAM6.6 User Manual

Page 49

The following items make up the Installation Menu:

PERIPH SETUP (PerSu)

SOURCE SETUP (SrcSu)

ZONE SETUP (ZonSu)

CTRLR SETUP (CtlSu)

POWER MGT (PwMgt)

LEARN IR (LrnIR)

MACRO EDITOR (MacEd)

SYSTEM INFO (SInfo)

PERIPH SETUP (PerSu)

Note: For CAM6.6, Peripheral Setup is not applicable. “N

t A

l” shows on the keypad.

Peripheral Setup allows the CAM6.6’s optional internal source to be configured.

The following items can be found in the PERIPH SETUP menu:

MEM NAME (MemNm)

BANK NAME (BnkNm)

CONTROLLR ID (CtlId)

REGION (Rgion)

FACTORY INIT (FInit)

SYSTEM INFO (SInfo)

MEM NAME (MemNm)

NOTE: A memory preset must be created and saved before it can be named. Once it is saved, the
preset’s Tuner #, Bank # and Memory # must be entered in the following procedure.

This procedure accesses a name entry field to enter a custom name for a memory preset.

See

Periph Setup - Flow Chart on page 64

1. BANK # –

Select the BANK # of the memory preset.

(Bank#)

2. MEMORY # –

Select the MEMORY # of the preset to be named.

(Mem #)

3. MEMORY NAME –

Use the volume up/down keys to select a character and left/right

(MemNm)

keys to change a character position. A blinking cursor indicates
placement of the character being entered. Names can be from 1
to 5 characters in length. If adding names from 6-12 characters,
it is suggested you use an optional UNO-S2 keypad.

BANK NAME (BnkNm)

This procedure accesses a name entry field to enter a custom name for each of the tuner’s six
banks.

See Periph Setup - Flow Chart on page 64

1. BANK # –

Select the BANK # of the memory preset.

(Bank#) (continued)

INSTALLER

INSTALLATION MENU

This manual is related to the following products:

SIX-SOURCE CONTROLLER CAM6.6T