RoyalTek REV-2000 - Manual (Page 17)

RoyalTek GPS Receiver REB-2000/REB-12R REV-2000 Operational Manual
13
(7) Select the COM port. Keep the Baud rate
at 19200 for REB-2100 and 9600 for
REB-12R2/R1.
(8) If you want to upload program to
Reb-2100, please assert the GPS2 check
box. But leave it unasserted for
Reb-12R2/R1.
(9) Click Upload to begin programming flash
memory.
(10) When you finish upload, turn off the power.
Keep the BOOT jumper open and turn on
power. It will run the new program that
uploaded into flash memory.
Product Features
REB-2100
— OEM product development is fully
supported through applications
engineering and WEB technique
forum.
— Small and compact footprints
measuring “ ”.
— 12 parallel channels
— 0.1 second re-acquisition time.
— Trickled power enabled for power
saving.
— Enhanced algorithm for navigation
stability.
— NMEA-0183 compliant
protocol/custom protocol.
— WAAS demodulator