RCA T19067 - Manual (Page 8)

6
Setup and Connections
Connection C:
Attaching to a Cable Box Required to Unscramble All
Channels
1. Connect as shown. Optional accessories may be required for this
connection.
2. Plug in power cords of TV/VCR and cable box.
3. Go to “Step 5: Connect the G-LINK Cable.”
Connection D:
Attaching to a Cable Box Required to Unscramble
Premium Channels Only
1. Connect as shown. Optional accessories may be required for this
connection.
2. Plug in power cords of TV/VCR and cable box.
3. Place the A-B switch in the B position to watch premium channels.
Place the A-B switch in the A position to watch other channels when
cable box is not needed.
4. Go to “Step 5: Connect the G-LINK Cable.”
IN FROM
ANTENNA
AUDIO
INPUT
VIDEO
OUT IN
Cable from Cable System
Coaxial Cable
Back of TV/VCR
Cable Box
G-LINK
IN FROM
ANTENNA
AUDIO
INPUT
VIDEO
B A
OUT IN
Cable from Cable System
Antenna Splitter
Cable Box
Coaxial Cables
A-B Switch
Coaxial Cable
Back of TV/VCR
G-LINK
In order for the cable box to properly
work with your TV/VCR, you must
complete “Step 8: Set Up the GUIDE Plus+
System,” later in this section.