Setup and connections, Set the time and date (clock) – RCA T19067 User Manual
Page 16
1 4
Setup and Connections
Set the Time and Date (Clock)
Note that if you have set up the GUIDE Plus+ system, the Time menu will
not appear. Note that the only time you need to set the clock is when
you’re not using cable (or a cable box). To set the clock:
1.
Press MENU on the remote to display the TV/VCR Main Menu.
2.
Press 2 to display the Time menu.
3.
Press 1 to display the Set Time and Date screen.
4.
Use the number buttons on the remote to enter the time.
•
Press 0 before 1; 0 is added automatically before all other
numbers. Press 1 for AM or 2 for PM. Example: For a time of
1:07 PM, press 0, then 1, then 0, then 7, then 2.
5.
Use the number buttons on the remote to enter the date.
•
The day of the week will automatically appear after you enter
the year.
•
Press CLEAR on the remote at any time to change incorrect
entries.
6.
Press MENU on the remote to start the clock.
To exit and return to TV viewing, follow the on-screen instructions.
To display the time and date, press INFO on the remote.
TV/VCR MAIN MENU
1 Screen
2 Time
3 Timer Recordings
4 Parental Controls
5 Setup
6 GUIDE Plus+ Menu
0 Exit
TIME
1 Sleep Timer
2 Wake-up Timer
3 Set Time and Date
0 Exit
SET TIME AND DATE
Time --:-- -
(hh:mm)
Date: --/--/--
Press MENU to cancel
If you have set up the GUIDE Plus+
system, the Time menu will not appear.