RCA T19067 - Manual (Page 24)

2 2
Operating Instructions
How to Play a Tape
1. Insert a tape in the TV/VCR.
The TV/VCR automatically turns on. The tape automatically
begins to play if the safety tab on the cassette has been
removed and the Auto Play feature has been turned on.
2. Press PLAY, if necessary. The word Play and the time counter
appear on the screen.
3. If necessary, while the tape is playing, press TRACKING + or - on
the remote or CH ^ or v on the TV/VCR to remove any streaks
from the picture.
4. Press STOP on the remote or STOP/EJECT on the TV/VCR to stop
playback.
5. Press REW on the TV/VCR or REVERSE on the remote to rewind
the tape. If the VCR is playing a tape, the TV/VCR will search
backwards through the tape. If the TV/VCR is not playing a
tape, the tape will rewind back to its start.
• After the tape reaches its end during playback, it will
automatically rewind back to the beginning of the tape
and eject the tape.
• Pressing the remote’s ON•OFF button while the tape is
rewinding will not stop the tape. The tape will continue to
rewind until it reaches its beginning, and then the TV/VCR
will turn off.
6. Press FORWARD on the remote to advance the tape. If the VCR
is playing a tape when the FORWARD button is pressed, the TV/
VCR will search forward through the tape.
7. Press STOP/EJECT on the TV/VCR or STOP on the remote to eject
the tape once it is completely rewound.
Note that a cassette may be ejected even if the power is turned off.
P L A Y
A U D I O I N
R E W F F W D P A U S E P O W E R C H C H V O L - V O L + R E C
V I D E O I N
W A K E U P T I M E R S T O P
E J E C T
Safety Tab
PLAY 0:00:00
If the GUIDE Plus+ system appears when a
tape is inserted, press the GUIDE or CLEAR
button on the remote. The GUIDE Plus+
system will disappear in approximately
one minute if you do not press any
button.