RCA T19067 - Manual (Page 12)

1 0
Setup and Connections
Select your country and enter your ZIP
or Postal code. For Canada, use
CH ^ and v to select letters.
The next series of screens asks you
about your cable TV setup. If you have
a cable box, you must set the GUIDE
Plus+ system to control it. Otherwise,
it will not be able to locate and
download program information.
Tune your cable box to Channel 2 and
then select the brand of your cable
box from the choices available. The
system then searches for the correct
code to control your cable box. When
your cable box switches to channel 9 it
has located the correct code.
To complete GUIDE Plus+ setup, the G-LINK cable must be properly
attached to your cable box if you have one. See “Step 5: Connect the
G-LINK Cable,” later in this section.
Select Yes if the cable box changed to channel 9, or No if it did not. If you select No, the system will try another code.
If the GUIDE Plus+ system cannot recognize your cable box after several tries, a screen stating “Cable Box test failed...Please
consult your manual and try again” appears. Choose either Try Again or Skip Cable Box Setup. If you get this message, you
should also:
• Double check the brand of your cable box, and try entering it again.
• Check to make sure the G-LINK cable is attached correctly.
If you choose to skip the cable box setup some features of the guide may not be available until you successfully complete
this procedure.