RCA T19067 - Manual (Page 33)

Operating Instructions
3 1
• If you turn the TV/VCR off, the TIMER indicator will flash if
there is no cassette in the TV/VCR or the safety tab is missing
from the cassette.
10. If using a cable box, turn it on and tune it to the channel you want
to record before time for the recording to begin.
To check or clear a timer recording:
1. Press MENU on the remote to display the TV/VCR Main Menu.
2. Press 3 to display the Timer Recordings menu.
3. Press 2 to Review Existing Programs.
4. Press CLEAR to erase a program.
5. Press MENU to review the next program in sequence.
6. After you have reviewed all of your programs press MENU to exit.
To stop a timer recording:
• If it is a TV/VCR-timed recording, press and hold STOP/EJECT on the
TV/VCR or STOP on the remote. A timer program in progress will be
stopped. Only today’s recording of a Daily, Weekdays, or Weekly
program is canceled. The Daily, Weekdays, or Weekly program
remains in the timer.
• If it is a GUIDE Plus+ system-timed recording, you cannot stop it
using the remote or front panel. You must cancel the timer through
the GUIDE Plus+ system.
Copying and Editing Tapes
Use another VCR or camcorder as the playback VCR and the TV/VCR as
the recording VCR.
1. Turn on the VCR or camcorder and the TV/VCR.
2. Press 00 on TV/VCR’s remote to select the line input (VIDEO 1 or
VIDEO 2). Pressing 00 once tunes the TV/VCR to the AUDIO/VIDEO 1
input jacks on the rear of the TV/VCR. Pressing 00 twice tunes the
TV/VCR to the AUDIO/VIDEO 2 input jacks on the front of the
TV/VCR.
3. Insert the tape you want to copy into the playback VCR or
camcorder. Insert a blank tape with safety tab intact into the
TV/VCR.
4. Start the playback VCR or camcorder playing. If the tape was not
recorded on the playback VCR, streaks may appear and you may
need to adjust the tracking. When you reach the place you want to
begin copying, place the playback VCR or camcorder in play pause.
5. Press RECORD, then PAUSE on the TV/VCR’s remote.
TV/VCR MAIN MENU
1 Screen
2 Time
3 Timer Recordings
4 Parental Controls
5 Setup
6 GUIDE Plus+ Menu
0 Exit
TIMER RECORDINGs
1 Create a New Program
2 Review Existing Programs
Program 1 (One Time)
Channel 08
Start Time 02:10 PM
End Time 03:35 PM
Start Date 02/12/00 Sat
Tape Speed SLP
Press CLEAR to erase
Press MENU for next prog
VIDEO1